RTS KP95 Uživatelský manuál stáhnout pdf (Strana 10)

Advant Controller 31 / Issued: 03.99

Hardware 07 KP 90 R303

8 .1

1.5.2 Connecting the 24 V DC supply voltage

The supply voltage is fed in via a 5-pole detachable termi-

nal block.

Important:

Plug and unplug terminal block only with power is

off!

1.5.3 Electrical isolation and notes on earthing

The following illustration shows which circuit parts of the

unit are electrically isolated from each other and which

internal connections exist. Here, both the clearances and

creepage distances and also the test voltages used cor-

respond to DIN/VDE 0160.

The unit is connected via the 6.3 mm Faston terminal (bot-

tom left) to the functional earth (switch cabinet earth) via

a wire with a cross section of 6 mm

(also see Figure 6).

15 16 17 18 19

24V DC–IN max. 2,5 W

L+ M PEL+ M

Supply voltage

Signal name

Terminal number

Terminal designation:

15 L+ *) Supply voltage +24 V DC

16 L+ *) Supply voltage +24 V DC

17 M *) Reference potential (0V)

18 M *) Reference potential (0V)

19 PE Protective earth terminal,

connected with the Faston termi-

nal inside the device.

Do not cause earth loops.

Connect PE and Faston to the

same earthing potential!

*) Exclusively for connection to the Advant

Controller 31 basic unit (also see Figure 6).

Fig. 4: Assignment of the terminal block

for the 24 V DC-IN supply voltage

24V

DC-IN

CONSOLE RCOM

6 mm

cross section

Fig. 5: Electrical isolation and notes

on earthing

Connect to the

Faston of the

basic unit (see

Figure 6)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 89 90

Komentáře k této Příručce

Žádné komentáře

RTS KP95 Uživatelský manuál Strana 10

Komentáře k této Příručce

Související produkty a manuály pro Systémy intercom pro domy RTS KP95