RTS XCP-ADAM-MC Servisní příručka stáhnout pdf (Strana 56)

2. Select the key assignment type:

NUM

Intercom port.

Party line.

AUTO

Auto function.

FUNC

SLIST

Special list.

FUNC

IFB

FUNC

ISO

Camera ISO

FUNC

RELAY

Relay or GPI output.

3. Auto function assignment only: Tap an additional number to select the desired auto function:

Auto listen

Auto follow

Auto mute

Auto reciprocal

All call

DIM (talk level 2 only, for point-to-point key)

Auto table (use only with IFB)

3. Trunked intercoms only: Select an intercom matrix (tap

, or

etc.).

4. Tap one or more number keys to select the desired port number, party line number, etc:

a. If the destination is in the local matrix, just enter the number.

b. If the destination is in a remote matrix, you must always enter at least 3 digits, so for example to

assign port 1 you must enter

5. Tap

PGM

6. Tap down on a key to assign talk. Tap up to assign listen.

KP9X PHONE OPERATION

KP9X Hang-up Sequence

1. Turn off the TIF talk key.

2. On the keypad, tap

PHONE

CLR

3. Turn the TIF talk key on, then off. The TIF key talk and listen indicators will turn off and the TIF-951

"OFF" LED will activate.

KP9X Dial Sequence

1. Activate the TIF listen key (listen LED green).

2. Make sure the TIF talk key is off (Talk LED off).

3. On the keypad, tap

CLR

PHONE

PGM

1 2 ... 51 52 53 54 55 56 57 58

Komentáře k této Příručce

Žádné komentáře

RTS XCP-ADAM-MC Servisní příručka Strana 56

Komentáře k této Příručce

Související produkty a manuály pro Systémy intercom pro domy RTS XCP-ADAM-MC