RTS XCP-ADAM-MC Servisní příručka stáhnout pdf (Strana 34)

1. Press

FWD

PGM

to select

in the Key Assign menu.

displays. All key gains are now reset to the default level.

3. Tap

CLR

to quit.

☞

You do not need to run Save Cfg after resetting key gains. These settings are stored in the intercom

system.

Key Assign Menu, Setup Page

Use this menu item to change the setup page assignments on the KP-32 or EKP-32. One setup page is used

for the top row of keys, and another setup page is used for the bottom row.

1. Press

FWD

PGM

to select

in the Key Assign menu.

displays.

3. Press

↓↓

o r

↑↑

to select any of the following:

: Assign setup page 1 to the KP-32 or EKP-32.

: Assign setup page 2 to the KP-32 or EKP-32.

: Assign setup page 3 to the KP-32 or EKP-32.

: Assign setup page 4 to the KP-32 or EKP-32.

: Clear a page assignment from the KP-32 or EKP-32.

4. Tap

PGM

displays. Tap any key in the row where you want to assign the setup page. The key

assignments for that page should appear in the displays.

6. You can press

↓↓

o r

↑↑

to select and assign another setup page. Or, tap

CLR

to exit.

☞

You do not need to run Save Cfg to store changes to setup pages. These are stored in the intercom

system.

KEY OPTION MENU

Key Option Menu, Auto Dial

Use this menu item to store auto dial numbers.

1. Select

, then tap

PGM

displays.

3. Begin tapping number keys. The numbers will scroll in the

Call waiting

window.

☞

To insert a pause at any time, tap

CLR

. For example, you may have to insert a pause after

dialing 9 to get an outside line.

4. Tap

FWD

. (

Do not tap

PGM

)

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 57 58

Komentáře k této Příručce

Žádné komentáře

RTS XCP-ADAM-MC Servisní příručka Strana 34

Komentáře k této Příručce

Související produkty a manuály pro Systémy intercom pro domy RTS XCP-ADAM-MC