RTS XCP-ADAM-MC Servisní příručka stáhnout pdf (Strana 35)

displays (store auto dial number 1). To store a different auto dial number, press

↓↓

↑

to select the desired auto dial number.

6. Tap

PGM

displays (where XX = the auto dial number you selected).

8. Run Service Menu, Save Cfg, page 44, to store auto dial numbers.

Key Option Menu, Chime

You can add a chime tone to any key for incoming call announcement. The chime tone will activate for

about 5 seconds after a call is received.

1. Select

, then tap

PGM

2. Tap any keys where you want to add a chime tone. Both LEDs will light red for the selected keys.

3. Tap

CLR

to exit.

4. Run Service Menu, Save Cfg, page 44, to store Chime settings.

☞

The chime option will continue on a key even if you change the key assignment.

Removing the chime option from a key

Repeat the procedure to add chime, but tap any keys where the LEDs are lit red to turn them off. Run Save

Cfg to store the changes.

Key Option Menu, Key Groups

You can set up a key group, so that when you activate one key (the master key) all keys in the group will

activate. Up to 4 key groups can be set up.

1. Select

, then tap

PGM

displays. To select a different group, press

↓↓

↑

3. Tap

PGM

displays. The master key is the key that you will press to activate the group.

5. Tap the intercom key that you want to use as the master. Both LEDs next to the key will light red.

6. After you select the master key,

displays. Slave keys are the keys that will activate

along with the master key.

7. Tap one or more keys to select them as slave keys. Both LEDs will light green for each key that is

selected. You can tap a key again to remove it from the key group.

8. Tap

CLR

when finished.

9. Activating the master key should now cause it and all slave keys to activate. The LEDs for each key

will activate according to the current key assignment for that key.

10. Run Service Menu, Save Cfg, page 44, to store Key Group settings.

☞

Key group settings will continue on keys even if you change the key assignments.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 57 58

Komentáře k této Příručce

Žádné komentáře

RTS XCP-ADAM-MC Servisní příručka Strana 35

Komentáře k této Příručce

Související produkty a manuály pro Systémy intercom pro domy RTS XCP-ADAM-MC