RTS Cstrunk Specifikace stáhnout pdf (Strana 25)

CHAPTER 4

Telephone Operation

NOTE: Telephone operations require an optional TIF (Telephone Interface). Also, you must first assign an intercom key

to talk/listen to the TIF. We recommend a talk+auto listen assignment.

Receiving A Phone Call

When there is an incoming telephone call, the talk LED will flash red next to the KP-632 key that is assigned to the TIF.

Activate the key to answer the call.

Alternatively, there is an audible indication generated by the TIF unit for incoming calls. For information on TIF

configuration, see the TIF User Manual, which can be found at www.rtsintercoms.com.

NOTE: The red flash for incoming TIF call is the default operation. Alternatively, a continuous-red talk LED indication

can be provided. This is accomplished by selecting the Don’t generate tallies for TIF or trunk use in AZedit

(Options|Intercom Configuration|Options). For further information, see the AZedit User Manual.

Dialing And Hanging Up Using KP9x Keypad Sequences

KP9X Keypad Hang-up Sequence

1. Turn OFF the TIF talk key. (Tap down to toggle talk off. The talk LED should be off.)

2. On the keypad, tap PHONE CLR.

3. Momentarily turn the TIF talk key ON, then OFF.

The TIF key talk and listen indicators will turn off and the TIF OFF LED will activate.

NOTE: You can use the hang up sequence to hang up the TIF even if you did not place or answer the call.

KP9X Manual dial sequence

1. Activate the TIF listen key. (Tap upto toggle listen on. The listen LED should be on.)

Make sure the TIF talk key is off (Talk LED off).

2. On the keypad, tap CLR PHONE PGM.

3. Activate the TIF talk key.

The talk LED turns green, the ON LED at the TIF activates, and you should hear dial tone at the KP-632.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 103 104

Žádné komentáře

RTS Cstrunk Specifikace Strana 25