RTS XCP-48-RJ45 Uživatelský manuál stáhnout pdf (Strana 47)

Switches and Connections

IMPORTANT: You must remove the card from the frame in order to change any DIP switch settings on the front card,

see Figure 47 on page 43.

DIP Switch 1 Closed: Configuration via AZedit is disabled.

Open: (Default) Configuration via AZedit is enabled

Description:

Disables the configuration changes via AZedit. AZedit will still be able to view

the card configuration and connection status. The configuration can still be

changed via the serial and Telnet connections.

DIP Switches 2-4 Unused - Keep in Open Position

DIP Switch 5

Closed: Reset the Telnet user and passwords to their default value

User: telex

Password: password

Open: (Default) Uses the current user-name and password to their default values.

Description: Enables the user to reset the Telnet User-name and Password

DIP Switch 6 Closed: Enables a serial monitor on the backcard DB9 (J2).

Open: (Default) Enables pass-through serial port via the backcard DB9 (J2)

Description: Selects DB9 (J2) serial configuration.

DIP Switch 7 Closed: Runs the Boot Download.

Open: (Default) Runs the native flash program.

Description:

Switch to the boot download flash program. This program is sent with the

RVON-C card in case the native flash program becomes corrupt.

DIP Switch 8 DEBUG ONLY!

WARNING: DIP Switch 8 should always be left in the OFF position. It is reserved

for debugging and can have intended consequences.

FIGURE 47. RVON-C DIP Switch panel

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 106 107

Žádné komentáře

RTS XCP-48-RJ45 Uživatelský manuál Strana 47