RTS XCP-48-RJ45 Uživatelský manuál stáhnout pdf (Strana 43)

DB-9 Serial Port via backcard

Power............................................................................................................................................................................5W Typical

Physical ...............................................................................................................................................................8.25”W x 6.25”L

RVON-C JUMPERS and CONNECTIONS

A selectable RS-232/485 serial port is at connector J1 Serial (see Figure 45 on page 41) on the back card. Jumper connections

on J10, J11, and J12 (on the front card, see Figure 44 on page 40.) select the signal mode on J1.

• When J10, J11, and J12 are jumped from pins 1 to 2- J1 is configured for RS485.

• When J10, J11, and J12 are jumped from pins 2 to 3 - J1 is configured for RS232.

DB-9 Pin Function

1N/A

RXD, RVON-C Received

Data

TXD, RVON-C Received

Data

4N/A

5 GND

6N/A

7N/A

8N/A

9N/A

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 106 107

Komentáře k této Příručce

Žádné komentáře

RTS XCP-48-RJ45 Uživatelský manuál Strana 43

Komentáře k této Příručce

Související produkty a manuály pro Systémy intercom pro domy RTS XCP-48-RJ45