RTS XCP-ADAM-MC Servisní příručka stáhnout pdf (Strana 115)

Telex Communications

115

Note: The default level of +0.0 dB is also called the unity gain level. Normally, the list in the center

of the screen will show the gains for all party lines. If you check Show Non-Unity Only, you will

see only those party lines that are not set at the default level.

Use the Reset Gain button to reset the gain for whichever party lines are currently selected in the

center of the screen. This will reset gains to the default level of +0.0 dB.

Note: It is also possible to adjust the party line gains for a specific intercom port while viewing the

setup screen for that port. Access the keypanel setup. Then, select the desired intercom port in

the upper-left corner of the screen and click the Gain button.

Screen Items

Screen Item Field Type Description

Port text field

The Port field displays the system generated port number currently

being viewed.

Alpha drop-down list

The Alpha field displays the number of the Alpha currently being

displayed.

Listens To…

The Is Listening To… field shows the PL (party line) number, the alpha and the gain level

of the selected party line.

PL display column

The PL field displays the selected port for which the crosspoint listen

gain can be set.

From the Port field, select the

port

for which you want to set

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 181 182

Žádné komentáře

RTS XCP-ADAM-MC Servisní příručka Strana 115