RTS XCP-ADAM-MC Servisní příručka stáhnout pdf (Strana 111)

Telex Communications

111

Port display column

The Port field displays the system assigned number for the port.

Alpha display column

The Alpha field displays the alpha assigned to the port.

Closed display column

The Closed field displays the status of the crosspoint port.

No means the port is Open, while Yes means the port is Closed.

F/I display column

The F / I field shows whether the port is a forced crosspoint or an

inhibited crosspoint port.

To Force or Inhibit a port, do the following:

1. Select the port with which you want to work.

A pop-up menu appears.

2. Click either Force or Inhibit.

Force button

The Force button establishes a crosspoint between an audio input and

an audio output. This switch is MADE and cannot be released under

any other matrix condition. You can use the force function to establish a

link inside the matrix where there is no panel to allow intelligent

switching; alternatively, it is used to enable communications from

panels when the route must be established without permanently using a

key on the panel.

1. Click Force.

A crosspoint closure has been forced to the port selected.

Inhibit button

The Inhibit button restrains a crosspoint closure between the port

currently being viewed and the port selected. Inhibit prevents

communication from an audio source to a specific destination.

1. Click Inhibit.

The port is inhibited.

Release button

The Release button forces the crosspoint closure between the port

currently being viewed and the port selected to be released.

1. Click Release.

The port is released.

Inspect button The Inspect button provides detailed status information on the

crosspoint connection between the port currently being viewed and the

port selected.

Note: You can also access the crosspoint Inspection Results

screen by double clicking a port from either the Is Talking To… or

the Is Listening To…. list.

1. Click Inspect.

The Crosspoint Inspection Results screen appears.

Select All button

The Select All button selects all the available ports in the Port column.

1. Click Select All.

All the ports in the port column are highlighted.

De-select All button

The De-select All button removes the highlight from the all the ports in

the port column.

1. Click De-select All.

All the ports highlighted in the port column are de-selected.

Invert Selection button

The Invert Selection button reverses the selections made. For

example, if 3 ports are highlighted, and Invert Selection is clicked, the

three ports that were highlighted are no longer highlighted, while the

rest of the port list becomes highlighted.

1. Click Invert Selection.

The highlighted ports are no longer highlighted, while ports

that were not highlighted become highlighted.

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 181 182

Komentáře k této Příručce

Žádné komentáře

RTS XCP-ADAM-MC Servisní příručka Strana 111

Komentáře k této Příručce

Související produkty a manuály pro Systémy intercom pro domy RTS XCP-ADAM-MC