RTS TM-2000 Uživatelský manuál stáhnout pdf (Strana 25)

Recommended Cables

1. For cables using RJ-11 connections use Category 5

(CAT-5) network cable.

2. For RJ-45 connectors, use CAT-5 network cable. RJ-

45 Crossover (TM-2000 to TM-2000 network)

cables can be purchased pre-made from a computer

dealer.

3. For audio cables, use Belden 8723 or similar type

with two twisted pairs with shield/drain wires.

4. For individual RS-232 or RS-485 data cables, use

Belden 8451 or similar type with single twisted pair

with shield/drain wire. DO NOT EXCEED 50 FEET

RUN WITH RS-232 CABLES! RS-232 cables can

be purchased pre-made from a computer dealer. Use

an RS-232 wired “Straight Through” for SWP-2000

to TM-2000 connections. Use a RS-232 wired “Null

Modem” for PC to TM-2000/SWP-2000 connection.

5. For TM-2000 to ICP-2000. RS-485 cables use the

supplied cables.

6. For TM-2000 to SWP-2000 status/control cables use

25 conductor shielded cable. DO NOT EXCEED 10

FEET RUN LENGTH WITH CABLE.

FIGURE 27. TM-2000 to ICP-2000 RS-485 COM ports.

FIGURE 28. PC (TrunkEdit/TrunkSupervisor) to TM-

2000 or SWP-2000 RS-232 data cable.

FIGURE 29. SWP-2000

1 2 ... 20 21 22 23 24 25 26 27 28

Žádné komentáře

RTS TM-2000 Uživatelský manuál Strana 25