RTS TM-2000 Uživatelský manuál stáhnout pdf (Strana 18)

14 Installation TM-2000 & MTM-2000 User Manual

Bosch Security Systems, Inc.

User Manual

F.01U.193.264

Rev. 12

25. Right click a trunk entry under the Icom 1 column.

26. Select Choose New Assignment from the pop-up menu that appears.

27. Select the intercom system is desired for this end of the trunk line.

NOTE: Repeat the same for Icom 2 column in the same line except choose an intercom system different than that

selected for Icom 1. This defines which two (2) intercom systems (Icom 1 or Icom 2) is trunked via this

entry in the table.

28. Right-click in either the Port or Alpha entry associated with the Icom 1 entry you just made.

29. Select the Choose New Assignment from the pop-up menu that appears.

30. Select the Port or Alpha to be used for the audio trunk line from the system named in the Icom 1 column. Do the

same for the Port or Alpha entry associated with the Icom 2 entry except select the Port or Alpha from the Icom 2

system for the audio trunk line.

NOTE: If this particular trunk line is to be cascadable (i.e. usable to connect two (2) other adjacent systems), then be

sure to set the Cascade flag. To set or clear the Cascade flag, right-click on the Cascade entry for the trunk

line and select Set Cascade Flag or Clear Cascade Flag from the pop-up menu that appears.

31. Repeat this procedure for each intercom system audio trunk line needed.

32. Send the changes to the TM-2000/MTM-2000 and save the file.

33. Open AZedit.

34. Within each intercom system, assign keypanel keys as required to communicate with destinations in other intercom

systems.

NOTE: This is similar to assigning keys in the local intercom system, except you need to select an intercom system

first when making assignments. Click the KP button on the toolbar to access keypanel setup. Select the

intercom port you want to add a key assignment that communicates with a remote intercom system. If you

use the Key Assignment Select screen to assign keys, proceed as for normal key assignment, except that you

should select an intercom system before selecting a scroll list.

35. Send your changes to the intercom system and save the file before exiting AZedit.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Žádné komentáře

RTS TM-2000 Uživatelský manuál Strana 18