RTS RVON-C Uživatelský manuál stáhnout pdf (Strana 11)

CHAPTER 3

Installation

Installation of the RVON-16 Card into the ADAM System

CAUTION: The RVON-16 front card works with either an RVON-16 backcard or an RVON-8 backcard. However, if the

RVON-16 is used with an RVON-8 backcard, the second of the two RS-232 ports on the RVON-16 will not be

available. Similarly, an RVON-8 card will work with an RVON-16 backcard, but the second RS-232 port will be

unavailable. The second serial port is only available when an RVON-16 front card is used with an RVON-16

backcard.

The following firmware versions are the minimum required for RVON-16 support:

• MC V9.28.0

• MCII-e V1.6.0

• DBX V1.19.0 (w/PC V10.19.0 or w/PCII-e V1.19.0)

When inserting the RVON-16 in the ADAM system, the following considerations need to be made:

• Gently insert the RVON-16 into the correct slot. If the card is forced or twisted while inserting, a pin on the

backplane could short or break causing the card to become inoperable.

• When inserting the RVON-16 into the ADAM system, make sure to insert it into a compatible backcard. If

the card is inserted into an incompatible backcard, undesirable results can occur.

• DO NOT FORCE MATING CARDS

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 48 49

Žádné komentáře

RTS RVON-C Uživatelský manuál Strana 11