RTS KP-12 Uživatelský manuál stáhnout pdf (Strana 39)

KP-12 Keypanel Menu Mode 31

Bosch Security Systems, Inc.

User Manual

F.01U.193.243

Rev. 11

6. After an autodial number has been assigned, the call waiting window re-displays DIAL NUM.

7. Repeat steps 3 through 6 to store additional autodial numbers.

8. Press and hold the SELECT control for two (2) seconds to return to the top-level menu when you are finished

entering autodial numbers.

9. Use the “Menus, SERVICE, SAVE CFG” on page 52, to store your changes. Otherwise, the autodial numbers are lost

when the KP-12 is turned off.

Menus, KEY ASGN

Menus, KEY ASGN, General Description

The KEY ASGN menu provides greater flexibility than the top-level menu when assigning keys. Also, this menu offers some

additional types of key assignments not found on the top-level menu, including phone keys.

Menus, KEY ASGN, AUTODIAL (For KP-12, DKP-12 Only)

The AUTODIAL menu is used to assign a key to automatically dial a previously stored telephone number.

IMPORTANT: A TIF Interface must be connected to the intercom system to use this feature.

NOTE: To store phone number for use by autodial keys, see “Menus, Autodial (for KP-12/DKP-12 Only)” on page 30.

1. When you select AUTODIAL, the point-to-point scroll list displays for the currently selected intercom system.

Turn the SELECT control to locate one f the two (2) intercom ports to which the TIF is connected, then tap

SELECT.

The call waiting window displays TAP KEY.

3. Tap the intercom key that you want to use as an autodial key.

ADL0 displays in the call waiting window.

4. Turn the SELECT control to select the desired autodial number (ADL0 through ADL9), then tap SELECT.

The name ADL1, ADL2, etc. appears in the display above the new autodial key.

If restrictions against key assignments have been imposed using the intercom system configuration software, the intercom key

may ignore the assignment. In this case, contact the intercom system administrator if you need to make a change.

Unlike some other types of key assignments, which let you select the activation method, autodial keys are always assigned as

talk keys with auto-listen. When you activate the key both talk and listen are activated.

NOTE: You must save an autodial key configuration using the SAVE CFG command. “Menus, SERVICE, SAVE CFG”

on page 52. If you do not save the configuration, the autodial function will be lost when the keypanel is turned

OFF.

To return to the previous menu, do the following:

> Double-tap the SELECT control to return to the previous menu level.

Press and hold the SELECT control for two (2) seconds to exit menu mode.

1. If the intercom system is interconnected with other intercom systems, and the TIF is located in another intercom system, turn the SELECT

control to display ICOM followed by the desired intercom system name, then tap SELECT. Wait for the point-to-point list to be obtained

from the selected intercom system.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 67 68

Žádné komentáře

RTS KP-12 Uživatelský manuál Strana 39